Taking Down Metal Awnings: A Step-by-Step Guide

Removing metal awnings requires more than one person.

Metal awnings are available in compact versions that cover windows and doors, as well as larger models that span a porch or an entire wall. Some homeowners appreciate their appearance and the shade they offer, while others do not. Additionally, the metal may develop rust or discoloration, which can make a house look run-down. In most cases, taking down an awning only calls for a screwdriver. Still, it is advisable to have someone assist you, as awnings are heavy.

Step 1

Set a ladder beneath the awning and climb up so you can inspect it. If the awning consists of separate slats, raise the slats upward and then pull them outward to detach them from the main frame.

Step 2

Examine the left horizontal support bar that runs along the bottom of the awning and connects perpendicular to the wall through a mounting bracket. Put a screwdriver into the screws in the bracket and take them out. Pull the bar away from the wall, and the bracket will come off the wall.

Step 3

Have another person hold up the detached side of the metal awning while you repeat the process on the opposite side to detach the other horizontal support bar.

Step 4

Inspect the underside of the metal awning where it attaches to the wall to find a row of screws. These screws are usually on the underside of the awning but might be on the top. Remove each screw from the awning using the screwdriver.

Step 5

Grip the awning, and with assistance from another person, lower it to remove it from the house.

Step 6

Inspect the long mounting bracket still attached to the wall and remove its screws to detach it from the wall. You may need to use a utility knife to cut the caulk around the mounting bracket, if caulk was applied.