Clearing Adhesive Left Behind by Wall Paneling on Plaster Surfaces
In the past, paneling was typically attached with nails, but glue later became a common alternative because it was simpler to apply. As paneling trends shift, some homeowners take the panels down to expose the plaster underneath. Adhesive often stays on the wall once the panels are gone, and ordinary supplies can be used to deal with that residue.
By Sawyer Carter4 steps
Faux wood paneling has got to go!
Nails were once the standard way to hang paneling. Later, paneling glue came on the market; it was simpler to work with and gained wide popularity. Paneling fashions change over time, and a number of people choose to take the paneling down entirely so the original plaster wall material is exposed. It is common for the adhesive to stay stuck to the wall after the paneling has been removed. Materials that are easy to obtain can be used to clear away the leftover adhesive.
Step 1
Put on chemical resistant gloves, chemical resistant goggles and a suitable pair of work shoes. Into a metal cup, pour roughly 1 cup of brushable paste or gel adhesive remover.
Step 2
Using a bristled paint brush, apply the paste adhesive remover straight onto the paneling glue. Since the adhesive remover has a paste, or gel, consistency, it will remain where you put it. Let the remover stay on the paneling glue for as long as 30 minutes.
Step 3
With a putty knife, scrape the paneling glue off the plaster wall, and put the scrapings into a disposable container. Keep repeating the process until all of the adhesive has been taken off.
Step 4
Pour any remover you did not use back into its original container so it can be stored. Wash the tools you used with warm, soapy water.
